On-Grid Solar Power Plants
Aditya Solar has installed over 30MWp of Solar Power Plants in the year 2011-12 and are in the process of doubling the capacity in the current financial year.
Aditya Solar specialises in installation & commissioning the array yard (DC section) of solar power plants.
Generally a grid connected Solar-Photovoltaic Power plant comprises of the following equipments
| SPV Modules | SPV Modules Monitoring Structures | DC Cables |
| Array Junction Box | Earthing & Lightning arrestors | Grid Inverters |
| SCADA & Monitoring Equipment | Switch Yard | Transformers |
| Metering Yard etc. | Gantries & Transmission to sub-stations |
Any Solar PV plant installation will need a few factors to be considered before starting-up the project implementation. Some of the very important factors are as below
 | Conducting a site assessment | | BOS Locations |
| Array Orientation | | Selecting a system design |
| Array Location | | Adapting to a Mechanical Design etc. |
|
Array Mounting Methods
|
Design Parameters & Considerations
|
To make the best use of solar PV modules, you will need to capture as much Sun-Light as possible therefore the best location to place the solar modules is to the south-facing (in India) side on the site. You also want them to be installed at a certain angle-about 10-30 degrees (depending on the latitude of the site locations).
|
|
Assuming that there are 4.5 hours are good sunlight per day, a 1KW solar PV system will produce 4.5KWh per day, and 135kWh in a 30 days month (4.5x30 days). Please keep in mind that the energy produced is in DC Volts, and when it goes through the conversions into AC, you lose about 10-20% of the electricity
|
